Error c1 bbox How to solve it
Error c1 bbox: How to solve it ?
You do not know where the code of code of C1 Bbox Error that appears on the screen ? Bug Software, Poor Handling, Breakdown of the Bouygues Telecom Internet Network or Defective Equipment, There Are Many Causes. What are the steps to follow to resolve this concern ? Discover in this article some elements of Response.
What does Error C1 Bbox ?
The Screen Located On The Side of the Box Displays "Error C1" ? This means that it can be a slow connection or absence of connection. Thus, the c1 bbox error code is a message intended to alert users that a problem is found preventing you from connecting to the internet. It can also appear the IP Address is no long valid, following a loss of the box linked to a material dysfunction.
In general, this problem is common in subscribers using optical fiber connected to a box equipped with the wifi 6 standard. In Any Case, this concern prevents tinge advantage of services offed by the bouygues telecom box, in Particular access to bbox messaging . It is for this reason that it is necessary to define the Origin of the Failure and to resolve it as possible as possible. Sometimes some simple manipulations and within everyone is enough to overcome it.
How to solve the’Error C1 Bbox ?
If you use your Bouygues Telecom Box for the First Time, this C1 Error Code May Appear on the Screen. In this case, do not panic, this is normal, because this problem often occurs when connecting the bbox for the first time. Indeed, the Internet Service Provider Sometimes Takes A Little Time To Activate The Line.
So, Just Wait A Few Hours, Or Even A Day, to rebuild a test. If Patience is not your strong, do not hesitate to contact customer service. It will do what is necessary to solve your problem as soon as possible.
The C1 Bbox Error is Always Displayed Once the Internet Line Has Been Put Into Service ? Check if the problem is not caused by a generalized network of the network (bouygues, sfr, orange, etc.)). In this case, you will have to take your bread in patience and wait for the technicians to the line.
If no evolution is noted, it means that this is not an external breakdown, the concern could emanate from the bouygues telecom box. Therefore, the First Reflex is to check the integrity of the connections of the bbox. Indeed, if a cable is badly connected, just put it back in place correctly.
In case it is damaged, it should be replacement.
Indeed, avoid tinkering with a cut, torn or naked cable, at the risk of worsening the failure, or even damage the bbox.
If you find that there is Nothing to Report on the Connection Side, it is possible that the problem comes from a software bug. Thus, you should restart Your Bouygues Telecom Box and, at the same time, the Internal Hard Drive. To do this, turn off the bbox, unplug the power supply, and was a few minutes before reconnecting it.
How to do if l’Error c1 is still present on my bbox ?
In the Event that error c1 persists, the failure could be caused by a corruption of the bbox software or a more serious bug reconnection. To solve it, a complete reset of the box is required, just as is the case when the problem persist on the bouygues telecom tv decooder. The Operation Allows A Reset of All The Parameters of the Device to Adjust the Bugs. Here are the steps to follow to do this:
- Locate the "reset" button located at the rear of the case and press it by using a needle, a trombone or a toothpick;
- Hold the press for ten seconds (you can release after extinction of the bbox);
- WAIT UNTIL THE BOX IS COMPLETELY RESET AND CHECK THE SCREEN AFER RESTART.
This final solution did not allow you to obtain the expected result ? All You Have To Do is resort to the Services of A Competient Technician. To do this, contact bouygues telecom customer service. The Professional Who will be Aviet to you will make a diagnose of the bbox by using a dedicated application.
If unable to resolve the ISSUE, the Operator will be required to replace their Equipment.
